Granturismo GT Crank 64/110

£275.00

Full Circle 64mm stroke crank with 110mm long GT conrod, made by Granturismo.

The conrod eye takes either 18mm small end bearing for 18mm pins such as the GT240 piston or our 18mm to 16mm small end bearings for pistons with 16mm pin such as standard lambretta piston/TS/RB etc which are available in 20mm and 22mm width.

This 64 stroke crank is ideal for use with the GT240 kit to make the kit 250cc. (some port alterations to suit is beneficial). It comes as standard with the GT250 kit.

If using a standard engine case a small trench is required for the throw of the rod and for clearance between the big end eye and the crank case.

Fits straight into a GT engine case.

In stock (can be backordered)

Description

When fitting ensure there is at least 0.5mm clearance between the crank web and the drive side seal plate and at least 0.5mm clearance between the crank web and the mag housing. to increase the space between the drive seal plate and the web we supply 0.5mm sims that fit between the crank and the drive bearing

Brand

Gran Turismo

Additional information

Weight 2.3 kg
Dimensions 26 × 16 × 13 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…