Granturismo GT Crank 62/110


Full Circle 62mm stroke crank with 110mm long GT conrod, made by Granturismo.

The conrod eye takes either 18mm small end bearing for 18mm pins such as the GT240 piston or our 18mm to 16mm small end bearings for pistons with 16mm pin such as standard lambretta piston/TS/RB etc which are available in 20mm and 22mm width.

This 62 stroke crank comes as standard with the GT240 kit.

If using a standard engine case a small trench is required for the throw of the rod and for clearance between the big end eye and the crank case.

Fits straight into a GT engine case.

Available on back-order


When fitting ensure there is at least 0.5mm clearance between the crank web and the drive side seal plate and at least 0.5mm clearance between the crank web and the mag housing. to increase the space between the drive seal plate and the web we supply 0.5mm sims that fit between the crank and the drive bearing

Additional information

Weight 2.3 kg
Dimensions 26 × 16 × 13 cm


Gran Turismo


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…