Description
22mm wide
16mm inside diameter
22mm outside diameter
Lambretta pictures . Lambretta parts sales . Lambretta tuning tips, tools and service
£10.00
These small end bearings allow a piston which uses a 16mm gudgen pin to be used with a conrod that uses an 18mm gudgen pin.
The GT cranks and conrod kits all have a small end eye for an 18mm gudgen pin.
If you have a GT crank/conrod you will require one of these bearings if you also have:
GT186 kit
GT200 kit
Some alternative TS1 pistons, (measure the width of your current small end bearing)
The 20mm wide special small end bearing is listed below.
Out of stock
22mm wide
16mm inside diameter
22mm outside diameter
Weight | 0.025 kg |
---|---|
Dimensions | 2.2 × 2.2 × 2.2 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.