June 2019 we were on our way to the Euro in Poland. I was riding the GT300LC and, as usual, the journey there was as much a part of the trip as the rally itself. Simon’s TS1 was making sure we got plenty of time to appreciate the roadside as well.
He had bought his two-stroke oil in bulk and decanted it into smaller containers at home, ready to take away. Nothing wrong with that, until he packed the wrong containers. What came on holiday with him was paraffin or something similar, rather than two-stroke oil. We didn’t know that at the time.
His engine had been overheating all the way there. It seized twice, and keeping it going used two TS1 kits from the spares people had brought along. It even destroyed the big-end bearing on a new crank. That crank change was a separate roadside job on small roads in the Czech Republic, with us getting bitten by mosquitoes while it was swapped for a spare. It wasn’t the motorway top-end breakdown in Germany. Quite a lot of engine parts to get through before you start looking suspiciously at the bottle.
On 11 June we were stopped near Schlüsselfeld in Franconia, Germany, with another top end to sort out. My Facebook update that day summed up the situation: Simon had had a terminal and we were down to the last TS1 top end. Getting much further wasn’t looking particularly promising.
Getting back to him had involved me riding from one motorway junction to the previous one, then back down the other side. I wasn’t giving the LC anything like full beans. I had visions of us ending up with one f***ed engine eastbound and another westbound, which wouldn’t have improved matters much.
The photos show the workshop facilities. Side panel off, tools on the cobbles and everyone making use of whatever space there was around the scooter. Luckily people had packed spares, and between us we could keep him going. We were certainly getting some use out of them.


After the rebuild we rode to the nearest town in a thunderstorm. It was dark by then, with lightning ahead of us in the distance, and we eventually got a room late that night. Not quite the finish to the day we would have chosen.
[Lightning ride clip to add]
The following day we were finally out of Germany and into the Czech Republic. Simon was running in the donor steel-lined TS barrel, so we covered 220 miles on A roads. It was windy and over 35 degrees, and he had another little nip up on the barrel he was running in. The scenery was really nice. The temperature was less helpful.
With all this going on I had a look at what he was using for two-stroke. That was when the problem became rather more obvious. Tip the bottle and the liquid ran straight off the sides instead of clinging to them like oil. Whatever it was, it wasn’t behaving like the two-stroke oil it was supposed to be.
I made the short video below to show it, and posted it on Facebook on 13 June. Red liquid in a bottle doesn’t necessarily mean you have packed the right stuff. We had rather a lot of damaged parts to go with that demonstration.
I’m not going to claim we identified exactly what was in those containers. Paraffin or something along those lines is how I remember it. What mattered was that it wasn’t the two-stroke he thought he had brought.
So if you buy your oil in bulk, mark the containers and check what you’ve actually packed before leaving home. Watching how it runs off the bottle was the clue on this trip, not a substitute for knowing what’s in it. Spare barrels and a crank are useful things to have along, but the right oil would have taken up a lot less room.
